Pagina delle impostazioni

The FX Settings Page allows you to customize and configure various features of your PilotAware FX device to suit your needs. Here’s a guide to understanding and using each section effectively:

‍

Accessing the Settings Page

1. ‍Connect to FX WiFi: Ensure your device is connected to the FX WiFi network.‍
2. Open the Settings Page: Navigate to the Settings Page using your browser at 192.168.1.1 or access it via the main PilotAware Dashboard.‍
3. In Page Explanations: Tap on the ? symbol of each section to bring up an explanation as to what each section does within the settings page.

Saving and Updating Settings‍

• Save Changes: Settings are saved automatically as you make adjustments. A banner will confirm that your settings have been updated successfully.

• Security Tips: Always double-check your Wi-Fi password and settings to avoid being locked out of your device.

1. Basic Settings‍

• Hex-ID: Enter your aircraft’s unique Hex ID, typically provided by your aviation authority. If you don’t have one, leave this field blank, and the system will generate one for you.
• Aircraft Type: Use the dropdown menu to select your type of aircraft (e.g., powered aircraft, glider, rotorcraft, etc.). This ensures the FX system accurately represents your aircraft in the airspace.

‍

2. Advanced Settings

• Mode-S/3D: Toggle this setting to enable or disable the Mode-S/3D feature. This service uses multilateration to plot the positions of aircraft with Mode-S transponders, enhancing your situational awareness.
• RS232 Protocol: Select the communication protocol for RS232 connections, such as FLARM or TRIG. Choose “Automatic” if you’re unsure or if you use a standard FLARM display setup.
• RS232 Baud Rate: Configure the baud rate for your RS232 connection. The default is set to “Automatic,” but you can select specific rates if needed for transponder or cockpit integrations.
• Horizontal Range Filter: Set the maximum horizontal distance for displaying aircraft data. Options range from unlimited to 1 km. This filter affects the RS232 output but does not alter the FX Radar display.
• Vertical Range Filter: Choose the maximum vertical distance for displaying aircraft data, with options from unlimited to 500 feet. Like the horizontal filter, this only influences the RS232 output.

Note: A warning message will appear if you set any range filters that limit traffic visibility.

‍‍

3. Auto Update Status

• GRID Status: This section shows whether your FX device is connected to iGRID and if automatic updates are active. If an update is ready, a message will prompt you to reboot the device to install it.
• Reboot to Install: If a software update is available, tap the “Reboot” button to apply the update.

‍

4. Software Updates (Click here to read in greater detail)

• Semi-Automatic Updates: This method allows for easy updates via cellular connection. The system will display the latest version and update progress.
• Manual Updates: If you prefer to update manually, upload the firmware file Downloadable here (Rosetta-FX-s3.bin). Select the file from your device, then click “Upload.” Make sure to keep the device powered during the process to avoid issues.

‍

5. Licensing‍

• License Key: Your license key is displayed here. Click the key icon (🔑) to update it if necessary. The system will also show how many days remain on your current license, with reminders sent before it expires.
• Serial Number: Your device’s unique serial number is shown for reference. Contact support if there are any changes to ownership or details linked to your device.

‍

6. FX Wi-Fi Settings

• Wi-Fi SSID: Enter the name for your FX Wi-Fi network. This is what will appear when connecting your display device, like an iPad.
• Wi-Fi Password: Set a secure password (8-20 characters) for your FX Wi-Fi. Confirm the password to ensure it’s entered correctly. Remember, losing this password may require you to send the device to PilotAware for resetting.